Choosing the wrong capsule size is one of the most common and costly mistakes in capsule product development. Too small and your dose will not fit; too large and you pay for empty space and risk poor fill uniformity. Use the free calculator below to find the right empty capsule size for your powder in seconds.
The right capsule size depends on two numbers: your fill weight per capsule and your powder's bulk density. Divide the fill weight (in grams) by the density (g/mL) to get the volume you need, then choose the smallest capsule size with at least that volume. The calculator does this for you.
Capsule size calculator
| Size | Volume (mL) | Max fill for your powder (mg) | How full |
|---|
Estimates only. Real fill weights depend on your powder, filling machine and tamping. Always confirm with a filling trial using samples.
How the calculation works
Every capsule size has a fixed internal volume. The amount of powder that fits depends on how dense the powder is:
Volume needed (mL) = Fill weight (g) ÷ Bulk density (g/mL)
For example, 500 mg of a typical supplement powder at 0.6 g/mL needs 0.5 ÷ 0.6 = 0.83 mL. Size 0 holds 0.68 mL, which is too small, so size 00 (0.90 mL) is the right choice.
Capsule size and volume reference
| Size | Volume (mL) | At 0.6 g/mL (mg) | At 0.8 g/mL (mg) | At 1.0 g/mL (mg) |
|---|---|---|---|---|
| 000 | 1.37 | 822 | 1,096 | 1,370 |
| 00 | 0.90 | 540 | 720 | 900 |
| 0 | 0.68 | 408 | 544 | 680 |
| 1 | 0.48 | 288 | 384 | 480 |
| 2 | 0.36 | 216 | 288 | 360 |
| 3 | 0.27 | 162 | 216 | 270 |
| 4 | 0.20 | 120 | 160 | 200 |
| 5 | 0.13 | 78 | 104 | 130 |
See the full empty capsule size chart for dimensions, weights and carton quantities.
How to measure your powder's bulk density
- Weigh an empty 100 mL measuring cylinder.
- Gently pour in your powder up to the 100 mL mark without tapping or pressing.
- Weigh again. The powder weight in grams divided by 100 gives the bulk density in g/mL.
- For machine filling with tamping, also measure the tapped density, which is usually higher.
Tips for choosing the right size
- Leave a small margin: aim for a size where your dose fills roughly 80 to 95 percent of the volume.
- Fluffy herbal powders often need a size larger than expected. See encapsulating herbal powders.
- Size 0 and 00 are the most popular for supplements; size 000 can be hard for some people to swallow.
- For children and older patients, consider smaller sizes. See paediatric capsule formulations.
- Confirm with a filling trial. See how to fill empty capsules.
Frequently asked questions
How do I know which capsule size I need?
Divide your fill weight per capsule in grams by your powder's bulk density in g/mL to get the volume needed, then choose the smallest capsule size with at least that volume. The calculator on this page does it automatically.
How much powder fits in a size 0 capsule?
A size 0 capsule has a volume of about 0.68 mL, so it holds roughly 400 to 550 mg of a typical powder, depending on density.
How much powder fits in a size 00 capsule?
A size 00 capsule has a volume of about 0.90 mL, so it holds roughly 540 to 720 mg of a typical powder, and up to about 900 mg of a dense powder.
What if my dose does not fit in a size 000 capsule?
Split the dose into two or more smaller capsules, or increase the powder density by granulating it.
Can I get capsule samples to test my fill?
Yes. Universe Capsules can send samples of empty hard gelatin capsules in the sizes you shortlist.
Found your size?
Request samples of empty hard gelatin capsules in your size and colour for a filling trial.
Request samples






